Molykote D-708 is an anti-friction coating used for the lubrication / corrosion protection of metal / plastic and metal / plastic couplings under low to medium loads. This advanced material offers excellent corrosion protection and a low coefficient of friction. The operating temperature range of the cured film will be -60 to 240 degrees Celsius. This product is also well suited for automotive applications such as seat belt components, door locks and transmission parts.

Molykote D 708 AF Coating has a density of .95g / ml at 25 degrees Celsius and its flash point is 0 degrees Celsius. The curing time will take approximately 60 minutes at 180 ° C and 20 minutes at 200 ° C. The visual appearance of this material is glossy black. Molykote D-708 has been specifically designed to provide a high quality surface finish as well as corrosion protection and lubricating properties. This product is a dispersion of solid lubricants in an organic resin solvent system.

It is recommended that you mix the Molykote D708 Anti-Friction Coating thoroughly before using. All surfaces must be cleaned and degreased before application. This innovative coating is formulated to be applied by dip coating or spraying. For the material to work properly, the film thickness should be between 5-15 microns. Viscosity can be adjusted by diluting the coating with a methyl ethyl ketone (MEK) solvent. This product is well suited for automotive as well as others, but has not been tested and found suitable as an anti-friction coating for pharmaceutical and medical applications. For more information on this material, contact Krayden and a certified representative will assist you with any questions you may have.