LOCTITE® 5331™ is a one-component, white paste acetoxy silicone thread sealant recommended for use on plastic pipe threaded fittings carrying hot or cold water. It cures at ambient temperatures under the influence of atmospheric moisture to form a low strength flexible seal against hot and cold water.
Typical Properties
- Specific gravity (25 °C) 1.1; viscosity (Brookfield RVT, spindle 7, 10 rpm) 50,000 mPa·s; open time (25 °C) 5 min
- Instant seal 0.05 MPa water pressure (25.4 mm fittings); full sealing 0.3 MPa within 12 hours at min 40% relative humidity
- After 72 hours (M10 steel) breakaway torque 1.5 N·m, prevail torque 0.5 N·m; breakloose torque 4.5 N·m, max prevail torque 1.0 N·m
- Low strength is maintained up to 150 °C; sealing up to 0.03 MPa in water at 90 °C; no leakage over 12 months cycling 20–90 °C in water/glycol
Use and Storage
- Apply to both male and female threads and work into the threads to ensure good wetting
- Not for use in pure oxygen or oxygen rich systems or with chlorine or strong oxidizing materials
- Store at 8–21 °C in a dry location in unopened containers
| Technical Data | |
|---|---|
| Viscosity 25°C mm2/s | 50.000 |
| Chemical Composition | Acetoxy silicone |
| Storing Temperature | Room temperature |
| Application | Sealing |
| Applicable Surfaces | Threads, plastic and metal fasteners |
| Strength | Medium |
| Specific Gravity | 1,1 |
| General | |
| Packing | 100 ML |
| Color | White |