Adhesives

Green, high-strength, low-viscosity anaerobic retaining compound for cylindrical fits, bearings and bushings; MIL-R-46082B.

Devcon 10610 Aluminium Putty (F) is a 9:1 aluminum-filled epoxy putty for rebuilding and repairing aluminum castings, parts and equipment.

Ultra-clear, fast room-temperature-curing two-part epoxy adhesive with gap filling, 1:1 by volume (formerly Hysol 3430).

Two-component, toughened epoxy paste adhesive for GRP, SMC and dissimilar substrates.

Purple, medium-viscosity anaerobic thread sealant for hydraulic and pneumatic fittings; contains no fillers.

Unfilled, solvent-free, flame-retardant epoxy laminating system for composite manufacture and repair; BMS 8-201 Type III.

Devcon 5 Minute Epoxy is a rapid-curing, 1:1 general-purpose epoxy adhesive/encapsulant that bonds metals, ceramics, glass, wood and concrete.

Toughened two-step acrylic adhesive for high peel and impact loads; cures at room temperature with an initiator.

Purple, low-strength, thixotropic anaerobic threadlocker for easy disassembly of set screws and small fasteners; MIL-S-46163A.

Ceramic-filled, wear-resistant epoxy putty for rebuilding and protecting metal surfaces exposed to friction.

3M Scotch-Weld EC-1945 B/A is a two-part, room-temperature-curing, corrosion-inhibiting primer that improves adhesion of sealers, epoxies and urethanes to metals.

Loctite 225 is a medium-strength brown anaerobic threadlocker for fasteners that require disassembly with standard hand tools.

Loctite 407 is a low-viscosity ethyl cyanoacrylate instant adhesive for applications requiring heat resistance, bonding rubbers, plastics and metals.

Low-flow, toughened two-part epoxy adhesive with rapid room-temperature cure and 2:1 mix ratio; high strength.

Red, high-strength, fast-curing thixotropic anaerobic threadlocker for heavy-duty fasteners subject to severe shock and stress.

Loctite 586 is a red anaerobic thread sealant that seals threads against water, oil and most common organic materials.

Two-component polyurethane structural adhesive, non-sag, for primed or painted metals and plastics; aerospace-certified EC grade.

Blue, low-strength, wicking anaerobic threadlocker for pre-assembled fasteners and set screws.

White, low-strength anaerobic thread sealant (PST) for metal pipes and fittings; tested to 207 bar.

Pink, high-viscosity anaerobic gasketing product for close-fitting rigid metal flanges; medium strength.