Adhesives

Two-Component Epoxy Adhesive · High Shear & Peel Strength

General purpose silicone primer · blue

Two-part, room-temperature-curing structural epoxy adhesive (green) with high shear strength and controlled flow.

Activator for LOCTITE anaerobic adhesives and sealants, for faster cure on passive surfaces and large gaps.

3M Tape Primer 94 is an adhesion promoter that improves the bond of 3M tapes to plastics such as PE and PP, ABS, concrete, wood, glass and metal.

Solvent-based activator for LOCTITE toughened acrylic adhesives; fixture in 4 minutes or less on steel with AA 330.

Polychloroprene (neoprene) contact adhesive with long bonding range, high initial strength and heat resistance, for rubber, metal, laminates and honeycomb.

Blue, medium-strength, low-viscosity anaerobic threadlocker for fine threads; tested to MIL-S-22473E Grade C.

Two-component polyurethane structural adhesive for tough, impact-resistant bonds on metals and plastics.

3M Scotch-Weld EC-1751 B/A is a gray, aluminum-filled, two-part room-temperature-curing epoxy structural adhesive with good void-filling properties.

Two-part, thixotropic, toughened epoxy paste adhesive curing at room temperature, for aerospace structural and interior bonding.

Quick-drying nitrile rubber and gasket contact adhesive with excellent fuel and oil resistance.

Loctite Ablestik 286 is a two-part, thermally conductive, room-temperature-curing epoxy adhesive with 1:1 volume mix ratio, for -55 °C to 105 °C.

One-component urethane methacrylate acrylic adhesive cured with Activator 7387, for bonding metal, wood, ferrite, ceramics and plastics.

Two-component, room-temperature-curing toughened epoxy paste adhesive with high peel strength to aluminium.

3M Scotch-Weld EC-2615 B/A is a two-part, non-sag epoxy adhesive with 20 min work life, curing at room temperature or with heat to a tough, impact-resistant bond.

Carbon-filled, electrically conductive two-part epoxy adhesive for general purpose bonding; -55 °C to +130 °C (formerly Eccobond 60L).

3M Scotch-Weld EC-3587 B/A Gray is a two-part polyurethane structural adhesive, void filler and fairing compound that cures at room temperature or with heat.

Fast-drying, high-tack, transparent multipurpose spray adhesive for foils, foams, fabrics, paper and carpeting.