B&B TC-100 is an aqueous cleaner for turbine engine gas path cleaning, used for both off-line (starter cranked) and on-line (fired) engine cleaning. When used as directed, it cleans compressor blades, stators and air passages, and safeguards against abnormal temperature increases, power loss and increases in fuel consumption. It is also commonly used in heated immersion cleaning equipment to remove oils, grease and soils from components and assemblies.
Features
- Removes salt, oil and solid deposits; non-flammable; low EHS impact
- May be used for crank and hot-running washing
Application
- Engine cleaning: apply per the applicable T.O.s and engine manufacturer's technical manuals; where there is no manual, a 25% concentration is suggested; then rinse with fresh water until the discharge from the tail pipe is clear
- Immersion cleaning: at 100% concentration, typically at 60–82 °C, with mechanical agitation; then rinse with heated water
Specifications and Approvals
- MIL-C-85704 Type IIA; NSN 7930-01-367-0983 (5 gal), 7930-01-367-0984 (55 gal)
- Boeing 747 Maintenance Manual 49-11-00; Boeing 737-600/700/800/900; CFM CP5060; GE Aviation C04-140; Pratt & Whitney Canada CPMC 79038
- Testing: Boeing D6-17487; Rolls-Royce MSRR 9914; AMS 1550A
Storage
- 12 months above 10 °C in the original sealed container; pails and drums
| Packing | 5 USG or 55 USG |