LPS Electro 140° Contact Cleaner is a controlled evaporation contact cleaner with very good wetting and penetrating action. Its flash point is 60 °C; it is non-conductive and leaves no residue. It is safe to use on most surfaces but may attack certain plastics. It is used on connectors, contacts, fluid systems, office equipment, relays and controls, semiconductor assemblies, switches, telephone equipment and printed circuits.
Approvals
- ASTM F-945; Bombardier (Canadair) BAPS 180-009; Learjet LES 1239J; Martin Marietta MMS-M2-10028; McDonnell Douglas CSD #1 (does not conform to stress crazing test)
Typical Properties
- Colourless; mild ether-like odour; propellant carbon dioxide
- Boiling point 174 °C; flash point above 60 °C (TCC); auto-ignition above 260 °C
- Specific gravity (20 °C) 0.78–0.81; dielectric strength (ASTM D-877) 15.14 kV; surface tension (25 °C) 25.9 dyn/cm
Use and Packaging
- Hold the can 15–20 cm from electronic components and spray directly on the surface to clean
- Protect from sunlight and temperatures above 50 °C
- 312 g aerosol (00916), 12 per case
| Technical Data | |
|---|---|
| Specific Gravity | 0.78 - 0.81 @ 20°C |
| General | |
| Packing | 11 OZ |
| Uncategorized | |
| Flash Point | > 140.0 °F (> 60.0 °C) |
| Boiling Point | 345.2 °F (174 °C) |
| Auto-ignition Temperature | > 500 °F (> 260 °C) |
| Specifications & Approvals | |
| NSN · P/N · CAGE |
6850-01-418-1704
· LPS ELECTRO 140 CONTACT CLEANER
· CAGE 66724
(BX)
|
| CAGE (Manufacturer) | 66724 |