LOCTITE® 278™ is a high strength threadlocker designed for the permanent locking and sealing of threaded fasteners. It cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. It is particularly suitable for less active substrates such as coated or plated surfaces and for applications where temperature resistance is required. It is a one-component, medium viscosity, green dimethacrylate ester liquid.
Typical Properties
- Specific gravity (25 °C) 1.08; viscosity (Brookfield RVT, 25 °C, 100 rpm) 2400–3600 mPa·s
- Fixture time (brass M10) 210–270 s
- After 24 hours (22 °C, M10 steel): breakaway torque 42 N·m, prevail torque 23 N·m; compressive shear strength min 15 N/mm²
- Coefficient of thermal expansion 225 x 10⁻⁶ K⁻¹; thermal conductivity 0.28 W/(m·K)
- Percentage of initial strength after 1000 hours at 22 °C: acetone 115%, brake fluid 110%, unleaded gasoline 105%
Use
- Where cure speed is too slow, use an activator
- Not for use in pure oxygen or oxygen rich systems or with chlorine or strong oxidizing materials
| Technical Data | |
|---|---|
| Viscosity 25°C mm2/s | 2,400 - 3,600 |
| Chemical Composition | Dimethacrylate ester |
| Storing Temperature | 8 - 28 °C |
| Application | Screw locking |
| Curing Time | 8–180 min |
| Applicable Surfaces | Metal: steel, stainless steel, brass |
| Strength | High |
| Specific Gravity | 1,08 |
| General | |
| Packing | 50 ML |
| Color | Green |