LOCTITE® 932™ is a low strength, fast curing threadlocker that provides easy disassembly and readjustment. It prevents breakage of fasteners made of soft metals during disassembly. It is a one-component, low viscosity, brown dimethacrylate ester liquid that fluoresces under UV light and cures in the absence of air. Typical applications are precision screws in the electronics industry, set and adjustment screws, and fasteners made of soft metals such as brass and aluminium.
Typical Properties
- Specific gravity (25 °C) 1.05; viscosity (falling ball, 25 °C) 100–160 mPa·s
- After 24 hours (22 °C): breakaway torque (M10 steel) 1–4 N·m; prevail torque 0.1–2.5 N·m
Use
- Clean surfaces with a Loctite cleaning solvent and allow to dry; on inactive metals or where cure is slow, use Activator 7471™ or 7649™
- Shake before use; do not allow the tip to touch metal surfaces
- Remove with standard hand tools; if necessary, heat the nut or bolt locally to about 250 °C and disassemble while hot
- Not for use in pure oxygen or oxygen rich systems or with chlorine or strong oxidizing materials; not normally recommended on plastics
| Technical Data | |
|---|---|
| Viscosity 25°C mm2/s | 100 - 160 |
| Chemical Composition | Dimethacrylate ester |
| Storing Temperature | 8 - 28 °C |
| Application | Metals, brass, aluminum |
| Curing Time | 5–60 min |
| Applicable Surfaces | Metal: steel |
| Strength | Low |
| Specific Gravity | 1,05 |
| General | |
| Packing | 50 ML |
| Color | Brown |