LPS Belt Dressing is an aerosol belt dressing that prevents belt slippage on flat, round and V-belts and eliminates squeaks. It contains no chlorinated solvents that deteriorate drive belts; it is water resistant and may be used in wet or outdoor conditions. Its plastic components are metal detectable. It is used on appliance drive belts, flat, round and polishing belts, bearings and bushings.
Approvals
- NSF International H1; Canadian Food Inspection Agency
- Ford Motor Co., General Motors Co., Kimberly-Clark, Whirlpool
Typical Properties
- Colourless; propellant propane/butane; volatile content 90%
- Flash point −7 °C (TCC); auto-ignition temperature 420 °C
- Temperature range 0 to 163 °C
- Specific gravity (20 °C) 0.67–0.69
Use and Packaging
- Stop the equipment; spray the inner surface of the belt from 15–20 cm, using only enough to cover the belt
- 284 g (10 oz) aerosol, 12 per case
| Technical Data | |
|---|---|
| Specific Gravity | 0.67 - 0.69 |
| General | |
| Packing | 10 OZ |
| Uncategorized | |
| Flash Point | 19.4°F (-7.0 °C) |
| Boiling Point | 195.8°F (91°C) |
| Auto-ignition Temperature | 788°F (420°C) |