LPS Copper Anti-Seize is a copper coloured anti-seize compound that prevents seizure up to 982 °C. It prevents seizure, heat-freeze, galling, rust and corrosion, and permits reuse of fittings, saving stud, bolt and nut replacement. It is highly adhesive on both wet and dry surfaces, will not run, drip or settle out and brushes easily. It is lead free and ideal for use on stainless steel and for joining dissimilar metals. It is used on bushings, chains, engines, flanges, furnaces, heat exchangers, manifolds, nuts and bolts, screws, studs and turbines.
Specifications and Approvals
- MIL-PRF-907E
- Boise Cascade, General Motors Co., Minntac - US Steel, Tampa Electric Co.
Typical Properties
- Colour copper; temperature limit 982 °C; four ball weld load 315
- Aerosol: viscosity (25 °C) 6600 cP; flash point above 40 °C (TCC)
- Bulk: relative density 1.09; flash point above 221 °C (open cup)
Use and Packaging
- Clean the surface and apply a thin, even coat; not for use on oxygen systems
- 340 g (12 oz) aerosol; 227 g and 454 g cans; 12 per case
| Technical Data | |
|---|---|
| Viscosity 25°C mm2/s | 6600 cP |
| Specific Gravity | 0.99 |
| General | |
| Packing | 12 OZ |
| Uncategorized | |
| Flash Point | >104.0°F (> 40.0°C) |
| Boiling Point | > 500°F (> 260°C) |