MOLYKOTE® 44 Medium is a grease that can be used over a broad range of temperatures, in particular on high temperature bearings. It consists of silicone oil and lithium soap. It has low evaporation, very good oxidation resistance and low temperature characteristics, is water resistant and is compatible with most plastics. It is used on bearings in oven fans, textile dryers, conveyors and kiln preheaters, on automotive clutch release bearings and on plastic parts. It contains no intentional PTFE or PFAS.
Typical Properties
- White to off-white; NLGI 2–3; worked penetration 240–280 mm/10; density 1.0 g/cm³
- Base oil viscosity (25 °C) 125 mm²/s; service temperature −40 to 200 °C; drop point 227 °C
- Bleed and evaporation (150 °C, 24 hours) 2.5% and 2.0%; water washout (38 °C) 1.0%
- Oxidative stability (99 °C, 100 hours) below 100 mbar; maximum Dn value 300,000 mm/min
Use and Storage
- Clean the points of application; apply by brush, spatula or automatic lubrication device
- Do not use on painted surfaces
- 60 months from date of production when stored unopened in a cool, dark place
| Technical Data | |
|---|---|
| Viscosity 25°C mm2/s | 84 |
| Working Temperature | -40 - 204 |
| Chemical Composition | Lithium |
| Storing Temperature | Room temperature |
| Applicable Surfaces | Control cables; plain bearings, bushings and sleeves; plastic lubrication; power screw drives; rolling element bearings; rubber and elastomer lubrication; slides, guides and tracks |
| Key Properties | Low evaporation; excellent oxidation resistance; wide service temperature range; excellent low-temperature properties; compatible with most plastics; water resistant |
| NLGI Consistency Grade | 2 |
| General | |
| Packing | 1 KG |
| Color | Off-White |