omniVISC® 1050 is a ready to use, permanently elastic, versatile silicone rubber adhesive. It cures at room temperature on contact with the moisture film present on all surfaces and with atmospheric humidity. It is particularly suitable for bonding and sealing materials with different thermal expansion, such as metals, glass, ceramics, wood, fabrics, leather, elastomers and thermoset plastics, with each other. After full cure it has good chemical resistance to water, weak acids and alkalis, fuels and lubricants, inert and fuel gases, oxygen and hydraulic fluids. It remains elastic in continuous service from −70 to 200 °C. It has very good electrical insulation and, with its resistance to abrasion, moisture, weathering and chemicals, is also used as a protective coating. Paints and lacquers do not adhere to its cured surface.
Applications
- Formed-in-place gaskets instead of paper, cork and rubber gaskets
- Bonding and sealing glass to metals and plastics; sealing sight glasses
- Sealing and securing threads where easy disassembly is required
- Filling and sealing joints at cable, pipe and equipment feedthroughs
Typical Properties
- Colourless transparent; viscosity (Brookfield RVT, 20 °C) 50,000–80,000 mPa·s; density 1.07 g/cm³
- Skin formation (25 °C, 50% RH) 8–14 min; full cure from 24 hours to several days depending on the application
- Hardness 28 Shore A; elongation at break approx. 400%; tensile strength approx. 3.5 N/mm²
- Thermal conductivity 0.17 W/(m·K); volume resistivity 4 x 10¹³ Ω·cm; dielectric strength 24 kV/mm
| Packing | 90 GR |