Shell Diala S4 ZX-I is a high performance inhibited transformer oil designed for the demanding requirements of new generation transformers. It is made from sulphur-free base oils produced with Shell's GTL technology; it has high oxidation resistance and provides long oil life. It contains no PCBs, DBDS or passivator. Being sulphur-free, it is non-corrosive to copper without additional passivation and meets the requirements of the DIN 51353, ASTM D1275, IEC 62535 and ASTM D1275B copper corrosion tests. Its low temperature performance supports heat transfer at start-up. It is dried and supplied with low water content and high breakdown voltage.
Specification
- IEC 60296 (2012): Table 2, inhibited transformer oil (I), section 7.1 (higher oxidation stability and low sulphur content)
Typical Properties
- Clear, bright; density (20 °C) 805 kg/m³; kinematic viscosity 9.9 mm²/s at 40 °C, 523 mm²/s at −30 °C
- Flash point (PM) 191 °C; pour point −42 °C; neutralization value 0.01 mg KOH/g; total sulphur 1 mg/kg
- Breakdown voltage: untreated 70 kV, after treatment 78 kV; dielectric dissipation factor (90 °C) 0.001
- Oxidation stability (500 hours, 120 °C): total acidity 0.002 mg KOH/g, sludge 0.001%, DDF 0.001
- Water content 8 mg/kg; inhibitor (DBPC) content 0.2% by mass
| Packing | 209 LT |